Jewel Ease

RFID jewellery stock app

Jewel Ease is an Android app that runs on rugged UHF RFID handhelds, letting jewellery warehouse staff scan tagged stock in, out, and between store and warehouse. A companion tag-writer utility pairs a barcode scan with writing, locking and verifying the matching RFID tag before it ever reaches the warehouse floor.

  • 2023
  • Android (Java)
  • UHF RFID handheld scanning
  • Barcode + tag utility
  • REST API stock sync
Illustration of Jewel Ease

The challenge

Jewellery stock moves constantly between a store and its warehouse, and counting it by hand does not scale once every piece carries an RFID tag. The operator needed a handheld app that could read a batch of UHF tags in one pass, tell a stock-in from a stock-out from a store-to-warehouse transfer, and post each batch to the right backend endpoint without someone re-keying tag numbers. Before any of that, someone also had to encode and check the raw tags in the first place.

Who uses it

Warehouse stock staff
Scan a batch of UHF tags on the handheld to move stock in or out of the warehouse.
Store/warehouse admin
Uses a separate Super Admin screen to send stock out from the store to the warehouse.
Tag preparation staff
Use the companion utility to scan a barcode and write, lock and verify the paired RFID tag before stock is tagged for the floor.

What we built

Staff scan a batch of UHF tags on a rugged handheld to move stock in or out of the warehouse, with repeat reads of the same tag merging into a running count instead of listing it twice. A Super Admin screen handles store-to-warehouse transfers separately, and a companion utility app scans a barcode to pair it with the RFID tag before stock reaches the floor.

  • Tag ID scan

    A general scan screen reads UHF tags continuously and lists each unique tag ID detected.

  • IN stock scan

    A dedicated screen scans a batch of tags and posts them to a warehouse stock-in endpoint.

  • OUT stock scan

    A dedicated screen scans a batch of tags and posts them to a warehouse stock-out endpoint.

  • Store-to-warehouse transfer

    A Super Admin screen behind the app's menu scans and posts an OUT batch against a separate store-warehouse stock endpoint.

  • Duplicate-tag counting

    Repeated reads of the same tag (matched by TID or EPC) increment a running count instead of listing the tag again, so a batch scan gives an accurate count.

  • Adjustable reader power

    A power slider sets the UHF reader's transmit power, saved per device so staff can tune scan range for a dense rack of tagged stock.

  • Companion tag-writer utility

    A standalone app scans a barcode over the handheld's UART scanner, then exposes write, lock and verify actions for encoding the matching RFID tag.

  • Crash and usage monitoring

    Firebase Crashlytics and Analytics track app stability and usage across the deployed handhelds.

How it works

  1. Staff open Jewel Ease on the rugged handheld and choose Tag scan, IN stock or OUT stock.
  2. The UHF reader streams detected tags; repeat reads of the same tag merge into a running count instead of appearing twice.
  3. Staff review the scanned count and save, which posts the tag batch to the matching stock-in, stock-out, or store-transfer endpoint.
  4. A Super Admin opens the separate OUT-stock screen to move stock from the store to the warehouse.
  5. Before a tag reaches the floor, preparation staff scan its barcode in the companion utility, then write, lock and verify the RFID tag it will carry.
Close-up of the Jewel Ease OUT stock scanning screen with its tag counter and reader power slider.
Close-up of the Jewel Ease OUT stock scanning screen with its tag counter and reader power slider.

Every part of the product

  • Jewel Ease

    Java, UHF RFID handheld SDK, OkHttp, Firebase

    The warehouse-floor app for scanning jewellery stock in, out, and between store and warehouse.

  • Tag writer utility

    Java, UART barcode scanner SDK, handheld power-control SDK

    A standalone tool for preparing tags: scan a barcode, then write, lock and verify the paired RFID tag.

How it’s built

Jewel Ease wraps the handheld's UHF reader SDK in a module that deduplicates tags by TID when the reader supports it and falls back to EPC when it does not, so a batch scan reports an accurate count rather than one row per read. Each screen talks to its own backend endpoint (scan, stock-in, stock-out, store-to-warehouse) instead of one generic API, which keeps the posted batch unambiguous about which movement it represents. Reader power is exposed as a simple slider persisted in shared preferences, since the right transmit power varies with how densely stock is racked. The companion tag-writer utility runs on the same rugged terminal family but as a separate, smaller app: it drives the handheld's UART barcode scanner and power-control SDK directly, keeping the tag-preparation workflow isolated from the stock-movement app that staff use day to day.

  • Android
  • Java
  • UHF RFID SDK
  • OkHttp
  • REST API
  • Firebase Crashlytics
  • Firebase Analytics

What clients say about working with us

Verified Fiverr reviews from our clients, quoted word for word.

5.0 98 verified reviews · Fiverr Top Rated
I am a returning customer 2x over and he has gone above and beyond on his work for making an app for me No questions asked!
jasonqasimiRepeat buyerKuwait · Android App Development
Really it was a very good experience with this freelancer. He has very clear understanding of our expectations and made a perfect logo for our business. He also made modifications as per the request without any hesitation. Thank you somuch Venzpire for your wonderful support.
happy_vibeIndia
Great experience working with this team! They delivered our app on time, with excellent communication and quality. Highly recommend for anyone looking for reliable app development
acazes22Repeat buyerUnited States · Android App Development

Read all 98 client reviews

Questions about Jewel Ease

What does Jewel Ease do?

Jewel Ease is an Android app Venzpire built for scanning UHF RFID-tagged jewellery stock on a rugged handheld. It covers general tag scans, stock-in, stock-out, and a Super Admin screen for moving stock from a store to its warehouse.

What is the companion tag-writer utility for?

It is a separate Venzpire-built app for the same handheld that scans a barcode and then writes, locks and verifies the RFID tag that will carry that barcode's identity, used to prepare tags before they reach the warehouse floor.

What hardware does Jewel Ease run on?

Jewel Ease runs on rugged Android UHF RFID handhelds. Venzpire integrated the handheld's UHF reader SDK directly so staff can tune scan power and read batches of tags without a separate reader accessory.

Your product could be next.

Tell us what you are building. Venktesh reads every application himself and replies within one business day.

Book a free strategy call